DAILY CLEANING
Clean your treadmill regularly. The running belt and console must be clean and dry for long term safe use.
Power off and unplug your treadmill. Wipe the exterior with a damp cloth and a small amount of mild soap.
The display console must be kept dry; however, wipe it with a dry, soft towel.
Note: Do not spray liquid directly on the treadmill. To avoid damaging the console, keep it dry at all.
ROUTINE MAINTENANCE
Warning: Before cleaning or maintalning the product, make sure to unplug the power plug of the treadmill.
Friendly remind: A thorough cleaning wlll prolong the llfespan of the treadmlll.
Regularly dust remove to keep the components clean. The surface of the running belt should be scrubbed with a damp cloth dipped in soap. Please note that do notlet water splash onto the electrical componentsor under the running belt.
HOW TO LUBRICATE:
1. Raise the Running Beltup on one side and applylubricant to the Running Board.
Use a rag to thoroughly wipe the lubricant over the running board.Repeat this process for the otherside.
2. The moving parts should turn freely and quietly. Abnormality of moving parts will afect the safety of the equipment.Inspect and tighten bolts regularly.
3. DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE APPLYING LUBRICANT which would cause ofincidents or person injuries .
Timetable recommended:
Lightuser (less than 3hours/ week) every Six months
Mediumuser (3-5 hours/ week) every Three months
Heavy user (more than 5 hours/week) every Two months